Speaker and water damage glossary
Short definitions of the words that come up when a phone or a speaker gets wet, and of the names we use in our app. Each entry links to the page where the term matters most.
- 165 Hz
- A low tone that vibrates 165 times per second. Speaker Doc and the free tone on this site use it to help push water out of a phone's speaker grille. Play the free tone
- Bluetooth speaker
- A portable wireless speaker, such as a JBL Flip or Charge, that plays audio sent from a phone over Bluetooth. The tone on this site can play through one, and the Speaker Doc app can't. Wet JBL speaker
- Bottom speaker
- The main loudspeaker on an iPhone, behind the grille on the bottom edge next to the charging port. Bottom speaker muffled after water
- Corrosion
- Chemical damage to metal, such as the pins of a charging port or a cable. Charging through a wet connector can cause it. Charging a wet iPhone
- Decibel (dB)
- The unit used to measure sound level. A phone app can only estimate it, because a phone's microphone isn't a calibrated measuring instrument. Testing an iPhone speaker
- Deep Clean
- A cleaning program in Speaker Doc Pro. It lasts about 25 seconds and runs in three stages, mixing a pulsed low tone with sweeps through a range of low pitches. How the cleaning programs work
- Earpiece
- The small speaker at the top of an iPhone's screen, the one you hold to your ear on a call. Apple calls it the receiver. Checking the earpiece
- Emergency override
- An iOS option, offered when you reconnect a cable after a liquid alert, that lets you charge even though liquid was detected in the connector. Apple intends it for emergencies. Liquid detected on iPhone
- Hearing safety
- Precautions against loud sound. Water eject tones play at high volume, so they belong on a speaker held away from your ear and never in headphones. Using a tone safely
- Hertz (Hz)
- The unit of frequency, counted in cycles per second. Low numbers are deep sounds and high numbers are sharp ones. Why we use a low tone
- IP67
- A water and dust resistance rating under the IEC 60529 standard. Apple gives it to iPhone 7 through iPhone XR and to iPhone SE (2nd and 3rd generation), tested at a maximum depth of 1 meter for up to 30 minutes. If your iPhone got wet
- IP68
- A higher rating under the same standard. Newer iPhones are rated IP68 at depths between 2 and 6 meters for up to 30 minutes, depending on the model. If your iPhone got wet
- Lightning and USB-C connector
- The charging port on the bottom of an iPhone. Older models use Lightning and newer ones use USB-C. Liquid in the connector
- Liquid contact indicator
- A small marker inside a phone that turns from white or silver to red when it touches water. On iPhones with a SIM tray, you can see it in the tray slot. Checking a used iPhone
- Liquid detection
- An iPhone feature, from the iPhone XS and XR onward, that blocks charging and accessories when it finds liquid in the connector or on the cable. The "Liquid detected" alert
- Microphone
- The part that turns sound into an electrical signal. An iPhone has several, used for calls, speakerphone and video. People can't hear you on calls
- Muffled sound
- Sound that comes out dull and quiet, with the high notes missing. After a splash, the usual cause is water in the speaker grille. Fixing a muffled speaker
- Qi wireless charging
- A standard for charging a phone by laying it on a pad instead of plugging in a cable. It doesn't use the charging port. Charging while the port is wet
- Rice
- A popular way to dry a wet phone. Apple advises against it, because small particles of rice can get into an iPhone and damage it. What to do instead
- Sine wave
- The simplest sound wave, a smooth tone at a single pitch. Most water eject tones are sine waves. Water eject tone
- Speaker cone
- The part of a speaker that moves back and forth to push air and make sound. Low tones make it move the furthest. Why low tones
- Speaker grille
- The mesh or row of holes over a speaker opening. Water caught in it is the usual reason a phone sounds muffled after a splash. Clearing a wet grille
- Speaker Score
- The result of Speaker Doc's Speaker Test. It's a number that compares your speaker with its own best past result, and it's an estimate, since it comes from the phone's own microphone. How the score works
- Speaker Test
- A free test in the Speaker Doc app. It plays tones through the iPhone's speakers, records them with the microphone, and checks whether the high notes still come through as clearly as the low ones. How to test an iPhone speaker
- Stereo
- Sound on two separate channels, left and right. An iPhone held sideways plays stereo through the bottom speaker and the earpiece. Checking both ends
- Turbo Clean
- Speaker Doc's free cleaning program. It plays a pulsed low tone for 12 seconds with the volume at maximum, then puts the volume back where it was. Water eject tone
- Vibration Booster
- An option in Speaker Doc Pro that adds vibration pulses in time with the cleaning tone. About the app
- Voice Memos
- Apple's built-in audio recording app. Recording yourself and playing it back is a simple check of the iPhone's call microphone. Testing your microphone
- Water Eject Shortcut
- A free Siri Shortcut that plays a low tone to push water out of the speaker. Community members made it, and the original is shared on RoutineHub. The shortcut compared with apps
- Water Lock
- An Apple Watch mode that locks the screen while you're in water. Turning it off plays a series of tones that clear water from the watch's speaker. iPhone has no equivalent. Water eject options for iPhone
- Water resistance
- A device's ability to keep water out under set test conditions. On iPhone it isn't permanent and can decrease with normal wear. If your iPhone got wet