What to do when your iPhone says "Liquid detected"

Unplug the cable. Your iPhone found liquid in the charging port, or on the end of the cable you just plugged in, and it won't charge or connect accessories through that port until everything has dried out.

Why the alert appeared

From the iPhone XS and XR onward, the phone checks the Lightning or USB-C connector every time you plug something in. If it finds liquid there, or on the cable or accessory, it blocks charging and accessories to protect both. The exact words depend on the port and on what you plugged in:

  • "Charging not available" on a Lightning iPhone connected to a charger.
  • "Liquid Detected in USB-C Connector" on a USB-C iPhone connected to a charger or accessory. Disconnect that cable right away.
  • "Liquid detected in Lightning Connector" with a Lightning accessory that doesn't charge the phone.
  • "Liquid Detected" with a USB-C accessory.

Don't charge through a wet connector. The pins on the phone or on the cable can corrode, and Apple warns that this can cause permanent damage or connection problems later. So unplug the cable from the iPhone, unplug the other end from the adapter or accessory, and leave both out until they're completely dry.

How long until you can charge again

Hold the phone with the connector pointing down and tap it gently against your hand to shake out what's loose. Then leave it in a dry spot with some airflow.

Try the cable again after at least 30 minutes. If the alert comes back, there's still liquid in the connector or under the pins of the cable. That's normal. Leave it in the same dry, airy spot and try again now and then, because a fully wet port can take up to 24 hours to dry.

Sometimes the phone is dry and still won't charge. Unplug the adapter from the wall, then connect everything again.

Need power before it's dry?

A wireless charger still works, since it doesn't use the port at all. Wipe the back of the iPhone dry before you set it on a Qi-certified charger.

There's also an emergency override. When you reconnect the cable, iOS gives you the option to ignore the liquid detection and charge anyway. It's there for real emergencies, and we'd keep it for those, because charging a wet connector is exactly how the corrosion above happens.

What not to do while you wait

  • Don't dry it with a hair dryer, a heater or compressed air.
  • Don't push a cotton swab, a twist of paper towel or anything else into the connector.
  • Skip the bag of rice. Small bits of rice can get into the phone and damage it.

No app can detect or clear liquid in the charging port either. iOS doesn't let apps read the liquid sensor at all. What dries the port is time and moving air, and the alert going away is the only sign you'll get that it worked.

If the speaker sounds muffled too, that's a different opening with a different fix, covered in our guide to a muffled iPhone speaker.

When it's the cable or the phone

Say the phone has been dry for a day, the cable has too, and the alert still shows up. Try another cable. If the alert only appears with one particular cable or accessory, that cable or accessory is probably damaged, and its maker is who to contact. If it appears with every Apple cable you try, the problem is in the iPhone and it likely needs service from Apple or an authorized repair shop.

Questions

Does "Liquid detected" mean my iPhone is water damaged?

Not by itself. It means the phone found liquid in the connector or on the cable when you plugged it in. Once both are dry, the alert should stop and charging works again. If it keeps coming back with every Apple cable while everything is dry, have the phone looked at.

Can I ignore the alert and charge anyway?

In an emergency, yes. When you reconnect the cable, iOS offers to override liquid detection. We'd only do it if you really need the phone, because charging through a wet connector is how the pins corrode. A wireless charger is the safer option.

Will a water eject app or tone dry the charging port?

No. No app can detect or clear liquid in the port, and iOS gives apps no access to the liquid sensor. Time and airflow are what dry it.

Sources

Speaker muffled too? Test it